Norrsken
doors
Doors » Tilt & Slide Door

Tilt & Slide Door

Tilt and slide door is best for locations as balconies, terraces and other places where there is not enough room for traditional outward or inward opening solutions. Tilt and slide doors are also perfect where there is a need for large glazed areas.

The product is based on the same profile system as Norrsken’s inward opening timber window (therefore it does not have a conventional threshold; see illustrations below). In addition to the traditional sideways slide opening, it tilts at the top for ventilation. GU hinge systems enable us to manufacture an opening sash of up to 130 kg. Profiles and technical properties are similar to Norrsken DK10 windows.

Tilt and slide door is available both in timber and aluminium clad. Traditional double glazing (Ug = 1,1 W/m²K) or energy efficient triple glazing (Ug = 0,6 W/m2K) can be used.

Finishing according to RAL, NCS (paint) or Norrsken (lacquer) tone catalogue by customer's preference.


Technical Properties of Norrsken Tilt and Slide Door:

  • Thermal transmittance
    With double glazing: Uw = 1,29 W/m²K;
    With triple glazing: Uw = 0,97 W/m²K;
    Thermal window: Uw = 0,87 W/m²K;
  • Sound insulation:
    With double glazing: Rw (C; Ctr) = 33db (-1; -4);
    With triple glazing: Rw (C; Ctr) = 35db (-1; -5);
  • Cross sections: frame 78 x 78 mm; casement 78 x 78 mm; transom/mullion 105 x 78 mm; glazing bar 63 x 78 mm or 85 x 78 mm;
  • Pine wood with quality class A1–A3;
  • Timber profiles are treated with water based preservatives;
  • Glazing unit: double glazing 26 mm (Ug = 1,1 W/m²K) or triple glazing 40 mm (Ug = 0,6 W/m²K);
  • Hardware: GU Unijet;
  • Frame dimensions: WxH max. 4,3 x 2,5 m;
  • Multi-light windows with transoms and mullions;
  • Weight of the opening casement up to 130 kg.

    Tilt & slide door - timber only PDF  Aluminium clad

    Tilt & slide door - timber only PDF Timber only


  1. Norrsken quotes are valid for 2 months from the date shown on the quotation.

  2. Payment terms are 50% deposit on placing the order and the remaining 50% upon your completed order being ready to ship from the factory. Once the sales contract is signed you agree to pay the full amount as stated in the contract based upon these payment terms.

  3. Once the deposit is paid your window manufacturing will commence. As each window is a bespoke product for your requirements changes cannot be made once manufacturing has started.

  4. Orders are based upon the measurements supplied to the factory either by you or by Norrsken. Where you have supplied the measurements, either from a window schedule or scaled drawings please check that these are accurate. Once manufacturing has started changes cannot be made. Norrsken will endeavor to check any measurements supplied to us but in the event that an error is made Norrsken cannot be held responsible.

  5. When the delivery arrives at the address supplied, removal of the goods from the delivery vehicle is the responsibility of the customer.

  6. Once the windows are delivered the warranty period commences and any issues arising will be covered by the warranty where applicable.

  7. When the delivery of your windows is made Norrsken will check with yourself or someone appointed by you that everything is in order with the delivery and that no damage has occurred in transit. Any problems must be pointed out at this stage. Claims can only be processed whilst we are on site and Norrsken cannot be held responsible for any damage occurring after the delivery has been signed off.

  8. A fitting manual will be supplied with your order. Any installation work carried out by you or by somebody appointed by you must be carried out in accordance with these fitting instructions. Failure to do so may invalidate your warranty.
ENQUIRE